Blue Half Transparent Silicone O Ring Heat Resistance Customized
Material Test Report
|Unit||Inspection In acc.||Required value||Measured value||Solution|
|g/cm³||ASTM D 297||1.86±0.04||1.84||Ok|
|MPA||ASTM D 412||10min||10.9||Ok|
|%||ASTM D 412||175%||264%||Ok|
|shore A||DIN 53 505||70°±5°||67-69°||Ok|
|%||ASTM D 395||25max||18.50%||Ok|
**A manufacturer with more than 30 years experiences
**Free samples are accepted
**Customized sizes are accepted
**Most types and sizes are in stock
**Fast delivery and production
What is our product advantage in products?
Packaging & Delivery & Payment
2.outer:carton box or as your requirement.
Delivery Details:8~10 days after receiving your advance payment.
1.What are the characteristics of the Oring
1)Easy to install:The shape and the mounting portion of the O-ring is
extremely simple and easy to install and removal.
2)Using a wide range:By selecting a suitable rubber material, it can
be used in water, oil, air, and various gases, pharmaceuticals with a stable seal.
3)Various types and sizes, low prices:Sufficient to meet the various
uses standardized materials, and the size is also very rich.
2. What precautions should be attention when using O-rings?
1) Installing the O ring should be careful not to be scratched by
sharp edges and thread, it is
better to use a jig to install.
2) When inserting the piston into the cylinder, it should be avoid to
scratch O ring by the edge of the hole.
3) When installing the O-ring, it should be avoid of reversing
5) Avoid recycle use of O-ring.
6) When to use the washing liquid to clean O rings, please confirm
whether the washing liquid
material is suitable for O-ring.
7) Some material may produce harmful gases after combustion.
Therefore, avoid incineration disposal.
3.What are the critical items should be attention when selecting the materials?
Even if the size is very consistent, the seal has no resistance for
fluid and temperature, it will also can produce swell and stiffen phenomenon, even shorten life, leakage.
Therefore, make sure in advance to fluid and temperature.
4. What storage method should pay attention to the O-ring?
1) Please keep a place in the absence of direct sunlight.
(UV and heat will accelerate the aging of the rubber.)
2)Please keep in ventilated, low humidity places, away from
moisture and mildew.
3)Avoid placing near the high temperature heat sources. (Heating could accelerate the aging of the rubber.)
4)Avoid hanging on hooks, metal lines above, or wear them with a
belt hanging. Please avoid
stressing on the O-ring
5)Please complete package. (or may cause scratches or foreign matter adhering.)
Contact me now:
MY NAME IS SHADOW.
Looking forward to working with you and creating win-win parternership.